Education

Researchers claim low-cost solar cells based on abundant metals

五月 8, 2012
By

Researchers claim low-cost solar cells based on abundant metals

Anne-Françoise PELE    5/4/2012 2:06 PM EDT

http://www.eetimes.com/electronics-news/4372400/Talk-from-the-hip-at-Microchip

PARIS – Researchers at the University of Basel, in Switzerland, said they have defined an approach to developing sustainable and renewable photovoltaics devices. This approach paves the way for low-cost solar cells based on abundant metals, according to an article published in the Chemical Communications journal.
Dye-sensitized solar cells (DSCs) consist of a semiconductor, titanium dioxide, which is coated with a colored dye. The dye absorbs sunlight and injects an electron into the semiconductor.

This is the primary event leading to the photocurrent, chemists said.
Researchers claimed they have achieved two breakthroughs. Firstly, they said they have developed a strategy for making and attaching colored materials to the surface of titanium dioxide nanoparticles. Secondly, they said that they have demonstrated that simple compounds of the readily available metal zinc may be used. The achievement was finding a method for the simultaneous synthesis of the dye and its attachment to the semiconductor surface, the team said.
Dye-sensitized solar cells have been assembled using a sequential approach: a TiO2 surface was functionalized with an anchoring ligand, followed by metallation with Zn(OAc)2 or ZnCl2, and subsequent capping with a chromophore functionalized 2,2′:6′,2″-terpyridine; the DSCs exhibit surprisingly good efficiencies confirming the effectiveness of the new strategy for zinc-based DSC fabrication.

Comparative testing of ruthenium and zinc dye-sensitized solar cells

The team of chemists noted that DSCs use ruthenium dyes, but ruthenium is very rare and expensive. Then, they have demonstrated that dyes from abundant and relatively inexpensive copper were effective in DSCs and the extension to cheap zinc compounds further increases the sustainability of the materials science.
"This is a significant step towards our dream of coupling photovoltaics and lighting in an intelligent curtain which can store solar energy during the day and function as a lighting device at night,” declared Ed Constable, professor at the University of Basel, in a statement. “This is at the core of our ERC research program Light-In, Light-Out."

Testing dye-sensitized solar cells under an artificial sun

—————————
If you found this article to be of interest, visit SmartEnergy Designline where you will find the latest and greatest design, technology, product, and news articles with regard to all aspects of clean technologies.

——————————————————————————————————-

Purdue students build street-legal 2, 200 mpg solar powered car

四月 26, 2011
By

Purdue students build

street-legal 2, 200 mpg solar powered car

http://www.physorg.com/news/2011-04-purdue-students-street-legal-mpg-solar.html

Purdue students build street-legal 2, 200 mpg solar powered car

Ted Pesyna, at left, president of Purdue Solar Racing, and Brian Kelley, a junior in computer engineering and member of the solar-car team, show their new vehicle, Celeritas.

The car achieved the equivalent of nearly 2,200 mpg while winning the urban division of the Shell Eco-marathon Americas, an international contest for college and high school students to design and build the most fuel-efficient vehicles. (Purdue University photo/Andrew

(PhysOrg.com) — The Purdue Solar Racing team’s solar-powered urban commuter car achieved the equivalent of almost 2,200 miles per gallon in the 2011 Shell EcoMarathon international competition this week in Houston.

The Purdue Solar Racing team’s solar-powered urban commuter car achieved the equivalent of almost 2,200 miles per gallon in the 2011 Shell EcoMarathon international competition this week in Houston.

2,564 miles per gallon achieved at Shell Eco-marathon: http://www.physorg … arathon.html

The Celeritas prototype can handle a full-sized driver seated upright in a car equipped with headlights, taillights, a trunk, energy regenerative braking, pothole-handling suspension and rearview backup cameras. The car, equipped with five onboard computer systems, generated so much electricity it was in jeopardy of overloading its onboard batteries. Subsequent versions of the car may include an air-conditioning unit to make it even more comfortable and to consume excess electricity. The team is applying for a VIN number and license plate to make it a street-legal experimental vehicle.

Team president Ted Pesyna, a senior from Indianapolis, said the students couldn’t be more pleased with their results in what was their first year competing in the urban division.

"We have clearly demonstrated the feasibility of an electric car that requires no burning of fossil fuels," Pesyna said. "Thousands of hours went into creating this machine but it is so worthwhile when the results show that we will eventually be able to move beyond oil for our transportation needs."

The team is drawn from an array of undergraduate programs including mechanical, electrical and computer engineering and aviation technology. It spent one year designing the $90,000 prototype and one year building it. The effort is funded largely through contributions from corporations and several Purdue schools and colleges.

—————————————————————————-

新太陽能燃料機 仿效植物生態發電

十二月 27, 2010
By

 

新太陽能燃料機

仿效植物生態發電

http://www.libertytimes.com.tw/2010/new/dec/27/today-int8.htm

〔編譯俞智敏/綜合報導〕

美國與瑞士研究人員最近研發出一種

模仿植物生態的太陽能發電原型裝置,

利用陽光與一種名為氧化鈰(ceria)的金屬氧化物,

把二氧化碳或水分解為可以儲存並運輸的燃料。

這項研究成果已發表在「科學」期刊上。

英國廣播公司(BBC)報導,

傳統光伏發電板(photovoltaic panels)

所產生的電力必須在原地使用,

也無法在夜間發電。

最新研發出來的太陽能發電原型裝置則是使用一塊石英窗與凹洞,

把陽光集中在一個塗有氧化鈰的圓柱裡。

氧化鈰具有受熱時可自然排出氧氣,

冷卻時吸入氧氣的特性。

在這款原型裝置中,二氧化碳以及/或水被打進裝置中,

氧化鈰受到冷卻就會迅速吸進其中的氧氣,

製造出氫或/以及一氧化碳。

這些生產出的氫可用於汽車氫燃料電池中的燃料,

而結合氫與一氧化碳則可製造出合成氣(syngas)作為燃料使用。

這項裝置的發明者表示,

在太陽能反應器中操控氧化鈰能夠吸收與排出氧氣的特性,

正是這項研究的重大突破,

而且氧化鈰是「稀土」金屬中數量最充足者,

應用上相當方便。

研究人員還說,同樣的裝置也可用來製造甲烷。

但這種原型裝置的效能仍然不佳,

在被導入裝置的太陽能中,只有0.7%到0.8%用來製造出燃料。

大部分的能源都經由反應器壁,

或因陽光透過裝置的開口再輻射所造成的熱損失而消耗殆盡。

但研究人員有信心,在使用更好的絕緣體及較小開孔後,

太陽能的轉換效率可提高至19%。

這種轉換率就足以製造出可用的商業太陽能發電裝置。

加州理工學院(Caltech)教授海爾表示,

這種太陽能反應品可用來製造運輸燃料,

或被用於大規模的太陽能發電廠中。

雖然外界認為這項裝置模仿植物生態,

也就是使用二氧化碳、水及陽光來製造能源,

有如植物的光合作用,

但海爾教授認為,

這種類比恐怕過度簡化發電過程。

加州大學打造環保釀酒廠 配備大型無線通訊網路

十月 20, 2010
By

 

加州大學打造環保釀酒廠

 配備大型無線通訊網路

http://www.eettaiwan.com/ART_8800622670_617723_NT_1000571f.HTM?8800062106&8800622670&click_from=8800062106,8723946550,2010-10-11,EETOL,ARTICLE_ALERT#

上網時間:2010年10月11日

美國加州大學戴維斯分校(University of California at Davis)的校園內,最近新完工了一座結合釀酒廠啤酒廠以及食品加工廠的園區,號稱將是全球最具綠色環保概念,而且是世界同類型的園區中,第一個配備無線通訊設施的。

該座造價2,000萬美元,佔地3萬4,000平方英呎的教學與研究園區,也可望成為首個贏得美國LEED綠建築白金認證的釀酒廠/啤酒廠/食品加工廠;該園區內有太陽能發電系統,以及能收集雨水、節約水資源的大型水處理系統,所收集的雨水用來澆花、沖洗廁所,完全依照LEED的綠建築規格。

新園區完全是由私人捐資興建,從設計到建築過程沒有來自公家單位的補助。在該座建築只有一層樓高的園區中,南翼是August A. Busch III啤酒與食品加工實驗室,北翼則是全新的教學與研究應用釀酒廠。

此外園區內擁有號稱是全球首套、造價100萬美元的無線釀酒設備,生產線上有152個無線葡萄酒發酵桶;該套設備是由半導體廠商Cypress的創辦人、總裁暨執行長T.J. Rodgers所率領的工程師團隊所設計打造,每個容量20升(liter)、電拋光的不?袗?發酵桶,都配備對釀酒成果至關重要的自動溫度控制系統與循環(pump-over)程序。

該新型釀酒桶還有一種特別設計的感測器,會每隔15分鐘擷取一次白酒與紅酒釀造過程中的糖分濃度(sugar-concentration)資料,透過無線網路傳送出去,精確度為0.25 Brix;當該釀酒廠完工之後,將會是全球所有同類場所中,配備最大規模無線網路的一個。釀酒廠旁邊就一片佔地12英畝(acre)的教學與研究用葡萄園。

(參考原文: UC Davis unveils green, wireless winery,by Mark LaPedus)

UC Davis unveils green, wireless winery

Mark LaPedus

10/6/2010 2:31 PM EDT

SAN JOSE, Calif. – A newly completed winery, brewery and food-processing complex at the University of California at Davis claims to be the world’s greenest–and first wireless–facility of its kind.
The $20 million, 34,000-square-foot teaching-and-research complex is expected to be the first winery, brewery or food-processing facility to earn LEED Platinum certification. The building includes an onsite solar power generation and a large-capacity system for capturing rainwater and conserving processing water. The stored rainwater will be used for landscaping and toilets, per LEED specifications.
The new complex was funded entirely by private donations; no state or federal funds were used in its design or construction. The south wing of the new one-story complex is home to the August A. Busch III Brewing and Food Science Laboratory. The complex’s north wing houses a new teaching-and-research winery.
The complex is said to use the world’s first wireless wine-fermentation system, a $1 million assembly of 152 wireless grape fermentors. This was designed, fabricated and donated by a team of research engineers led by T.J. Rodgers, founder, president and chief executive officer of San Jose-based Cypress Semiconductor.
Each of the 200-liter, electro-polished, stainless steel fermentors is individually equipped for automated control of temperature and the “pump-over” process, controlling two of the most important factors in determining final wine characteristics and quality.
Additionally, newly designed fermentor sensors frequently and precisely extract and transmit sugar-concentration data from white and red fermentations across a wireless network. Data from the sensors can be generated every 15 minutes with a precision of 0.25 Brix, a measure of sugar content.
When completed, the winery is expected to contain one of the largest wireless networks in any fermentation facility in the world.
The complex is adjacent to a new 12-acre teaching-and-research vineyard and is located within the campus’s Robert Mondavi Institute for Wine and Food Science.
The institute, which opened in 2008, comprises three academic buildings that house the Department of Food Science and Technology and the Department of Viticulture and Enology. (Design and construction of those academic buildings, which total 129,600 square feet, cost $73 million, paid for by a combination of state and private funds. The campus did not apply for LEED certification on the three academic buildings.)

http://www.eetimes.com/electronics-news/4209382/UC-Davis-unveils-green–wireless-winery-Semiconductor

——————————————————————————————————–

parallel programming language

十月 18, 2010
By

 

University releases parallel programming language

Peter Clarke

10/12/2010 5:41 AM EDT IllinoisUniversity

LONDON – Universal Parallel Computing Research Center (UPCRC) at the University of Illinois has issued a first release of Deterministic Parallel Java (DPJ), a computer programming language that it is claimed can provide enhanced support for parallelism on multicore processors while at the same time supporting popular programming styles such as objected-orientation.
UPCRC is research collaboration between several University of Illinois departments and corporate partners Microsoft and Intel.

The DPJ project is being led by Professor Vikram Adve and Ph.D. student, Robert Bocchino with the aim of making parallelism easy, and to that end they have focused on developers’ preferences.
DPJ is modular parallel language that helps developers port sequential Java applications, or parts thereof, to run on multicore systems. It also helps them rewrite parallel Java applications to simplify debugging, testing, and long-term maintenance, it is claimed. A further benefit is that DPJ-ported parallel code can co-exist with ordinary Java code within the same application, so that programs can be incrementally ported to DPJ, according to the UPCRC website.

The initial release of DPJ is reportedly the first language to guarantee deterministic semantics without run-time checks for general-purpose, object-oriented programs. Future versions of DPJ are set to guarantee deterministic use of object-oriented parallel frameworks and the safe mixing of deterministic and non-deterministic code, according to the website

For more information, or to download DPJ, visit the Deterministic Parallel Javawebsite.

Adve and his group are also working with Intel to define a similar set of extensions to C++ (DPC++),

which can be used to check similar properties for existing programming models such as Cilk, OpenMP and Threading Building Blocks (TBB).

Related links and articles:

UPCRC website
DPJ website

News articles:


Intel upgrades parallel programming suite

Khronos upgrades parallel programming standard

Imagination preps GPU/CPU compilers for parallel processing

—————————————————————————————————————–

新研發光學天線號稱具備可將訊號放大數百萬倍

十月 11, 2010
By

 

新研發光學天線號稱具備可將訊號放大數百萬倍

上網時間: 2010年09月24日

美國萊斯大學(Rice University)的研究人員透露,他們已精確地完成光學天線(optical antenna)的特徵化(characterized),可望藉此實現單分子感測器(single-molecule sensor)以及其他的先進非線性光學應用。所謂的光學天線是利用雷射在金屬電極之間的次奈米等級能隙(gap)誘導量子穿隧,號稱能將訊號放大上百萬倍。

「天線是一種能與輻射互動的金屬結構,並會因此產生振盪電壓(oscillating voltage);」萊斯大學教授Doug Natelson表示:「而在我們的案例中,電磁波就是光線(特別是實驗所使用的785奈米波長),而且這些光波會讓小型金屬電極內的電子大量出現,在奈米能隙產生改變電壓。在這個意義上,它實際上就是一種天線,但是針對光而非無線電波的天線。」

利用以上效應所製作的感測器,能透過控制電極間次奈米等級能隙的輻射強度來感應到單分子;根據萊斯大學研究人員的量測,這種精確度程度是比採用入射雷射(incident laser)高出數十萬甚至數百萬倍。Natelson表示:「舉例來說,緊密排列的奈米粒子已被用來充分強化粒子間能隙的電場,並實現單分子拉曼光譜儀(Raman spectroscopy)。」

緊密排列的金屬電極可扮演光學天線的角色,是因為它們的電子能用雷射來激發,誘導出電漿子(plasmon)──也就是自由電子集體震盪──其短暫的電磁場是入射雷射的數千倍,但遺憾的是,這些電廠很難量測與特徵化。而現在Natelson與博士候選人Dan Ward發現了一種相對較簡單的方法,可量測光學天線的次奈米電極間的電場。


這是以掃描電子顯微鏡所看到的奈米能隙元件黃金電極影像,該元件在實驗中用以捕捉並放大光線(圖片來源:萊斯大學教授Natelson實驗室)

研究人員是將電極冷卻到80開氏度(Kelvin,約-315華氏度),同時量測較低頻率的電驅動電流,以及較高頻率的光學驅動電流,推斷出電壓放大的倍數。


此圖片描繪一對次奈米等級黃金電極內的電漿子,如何收集雷射光線 (圖片來源:萊斯大學教授Natelson實驗室)

(參考原文: Optical antenna said to boost signals,by R. Colin Johnson)

 

http://www.eettaiwan.com/ART_8800621374_617723_NT_d2a807b2.HTM?8800060710&8800621374&click_from=8800060710,8723946550,2010-09-24,EETOL,ARTICLE_ALERT

———————————————————————————————————–

Android processor shines light on dark silicon

十月 4, 2010
By

Android processor shines light on dark silicon

Rick Merritt

8/24/2010 12:33 AM EDT

SAN JOSE, Calif. – Chip designers face a growing problem of dark silicon they cannot use due to rising power leakage. A new class of fine-grained, application-specific cores can help reclaim lost die area and create more efficient processors, said a University of California researcher developing a prototype Android processor that uses the approach.

"With each process node, the percent of a chip you can actively switch drops exponentially," said Nathan Goulding, a graduate student at UC San Diego in a paper at Hot Chips. "The utilization wall is here and scaling theory says it will just get worse," he said.

An experimental 45-nm block had 2.8 times less useable die area than a similar block in a 90nm part when handling the same function in a similar power envelop, he reported.

The answer, Goulding said, is to create a variety of application-specific cores that could deliver eight- to eleven-fold energy savings compared to using a general-purpose CPU.

UCSD researchers are building the Green Droid application processor to prove out their concepts. They have already identified and designed–using their own automated tools–21 cores that handle energy intensive jobs specific to a Google Android handset.

The group’s so-called Conservation cores run tasks that may consist of a handful of instructions or loops. They range from running some aspect of Android’s Dalvik virtual machine to processing key code for Linux or memory management functions.

Goulding claims his team has put in 7mm2 of silicon the capability to run 43,000 fundamental instructions that cover 95 percent of the most energy intensive tasks of an Android handset. The cores are managed by a central MIPS processor, a CPU chosen simply because the university had access to the core.

One of the most interesting aspects of the project is the automated tool the group created to generate its cores. It consists of a compiler that condenses a group of instructions into a higher level task and a code generator that spits out the Verilog to run the job in silicon.

"We wanted to control the whole process of creating the cores," said Goulding.

The application-specific cores don’t have the MIPS CPU’s overhead of fetching general purpose instructions and managing low-level registers. However, much work remains.

The team has yet to determine how to keep a MIPS host in a low power state while the accelerator cores work and how to arbitrate access to shared memory. Although the Green Droid design is still in an early state, its concepts stirred plenty of questions at the conference.

"I haven’t seen anything in accelerator cores at this granularity before," said Marc Tremblay, a veteran processor designer who recently left the former Sun Microsystems for a position at Microsoft.

http://www.eetimes.com/electronics-news/4206408/Android-processor-shines-light-on-dark-silicon

————————————————————————————————————————–

模仿植物光合作用 MIT開發高效率太陽能電池

十月 4, 2010
By

 

模仿植物光合作用

 MIT開發高效率太陽能電池

上網時間: 2010年09月10日

佈滿磷脂碟狀物(phospholipid disks)的碳奈米管

能讓太能量採集具備自我修復(self-repairing)的功能,

就像是植物行光合作用

 

這種光電化學(photoelectrochemical)太陽能電池

是由美國麻省理工學院(MIT)的研究人員所開發,

其能源轉換效率號稱可達到目前效能最佳之固態太陽能光電板的兩倍。

 

以人工方式進行的太陽能轉換,以及自然界的太陽能轉換,兩者間的主要不同之處,在於工程師會為太陽能電池做防護,以避免固態無機材料的逐漸劣化;而自然界的太陽能轉換,是透過光合作用,來預防並修復不可避免的液態有機材料損壞。

在自然界,使用永續性太陽能的案例不勝枚舉;

舉例來說,能讓樹葉進行光合作用的有機化合物,經常會受到陽光的損壞,但樹葉有自我修復機制。透過對能夠不斷更新其太陽能轉換燃料機制的生物性光合作用過程之研究,科學家們現在已經有自信能製作出模仿該種自我修復能力的太陽能電池。

MIT的研究人員並沒有聲稱已經破解光合作用的秘密,但表示已能夠模仿植物的自我修復機制,不斷充實其能量採集技術。

光合作用過程包含一些內建的機制,植物內部以化學為基礎的動力引擎,會週期性地分解為基本的功能區塊(building blocks),然後那些更新過的元素會再重組成全新的引擎。根據MIT教授Michael Strano的說法,植物會每個小時執行以上的程序,更新並循環其基於蛋白質的光合作用功能,使其以最佳效率持續運作。

Strano所開發的方案,具備一種會模仿光合作用程序可逆性、叫做磷脂的合成性碟狀分子,該種分子每一個都具備能將光線轉換成電流的內部反應中心;當把該種分子與碳奈米管混合到溶液中,碟狀分子會圍繞著碳奈米管自我組裝。由於碳的導電性比金屬好,當曝露在陽光下時,奈米管會提高釋入碟狀分子的電子之傳輸率。

而在碟狀分子的內部,Strano的團隊利用了會自我組裝成光線採集器的、由七種不同元素組成的化合物,建立了類似光合作用的循環性機制。透過添加一類似除油劑的介面活性劑,所有化合物組合會裂解為原來的元素;若再用過濾器將溶液中的介面活性劑去除,那些原始元素又會再次自我組裝成太陽能電池。

與目前性能最佳的、能源轉換效率不到20%的固態太陽能電池相比,MIT研究人員開發出的液態光電化學電池,轉換效率號稱可達到40%;研究人員並表示,開發濃度更高的碳奈米管與碟狀分子組合,可望能將這種太陽能電池的效率進一步提高。

(參考原文: Self-repairing solar cell is bio-inspired ,by R. Colin Johnson)

http://www.eettaiwan.com/ART_8800620128_675763_NT_119685f1.HTM?8800059530&8800620128&click_from=8800059530,8723946550,2010-09-10,EETOL,ARTICLE_ALERT

—————————————————————————————————————————-

Multicore may not be so scary: Linux will keep up with addition of more processing units

十月 3, 2010
By

 

Multicore may not be so scary: Linux will keep up with addition of more processing units

Computer chips have stopped getting faster.

To keep improving chips’ performance, manufacturers have turned to adding more "cores," or processing units, to each chip. In principle, a chip with two cores can run twice as fast as a chip with only one core, a chip with four cores four times as fast, and so on.

But breaking up computational tasks so that they run efficiently on multiple cores is a difficult task, and it only gets harder as the number of cores increases. So a number of ambitious research projects, including one at MIT, are reinventing computing, from chip architecture all the way up to the design of programming languages, to ensure that adding cores continues to translate to improved performance.

To managers of large office networks or Internet server farms, this is a daunting prospect. Is the computing landscape about to change completely? Will information-technology managers have to relearn their trade from scratch?

Probably not, say a group of MIT researchers. In a paper they’re presenting on Oct. 4 at the USENIX Symposium on Operating Systems Design and Implementation in Toronto, the researchers argue that, for at least the next few years, the Linux operating system should be able to keep pace with changes in chip design.

Linux is an open-source operating system, meaning that any programmer who chooses to may modify its code, adding new features or streamlining existing ones. By the same token, however, any public distribution of those modifications must be free of charge, which makes Linux popular among managers of large data centers. Programmers around the world have contributed thousands of hours of their time to the continuing improvement of Linux.

Clogged counter

To get a sense of how well Linux will run on the chips of the future, the MIT researchers built a system in which eight six-core chips simulated the performance of a 48-core chip. Then they tested a battery of applications that placed heavy demands on the operating system, activating the 48 cores one by one and observing the consequences.

At some point, the addition of extra cores began slowing the system down rather than speeding it up. But that performance drag had a surprisingly simple explanation. In a multicore system, multiple cores often perform calculations that involve the same chunk of data. As long as the data is still required by some core, it shouldn’t be deleted from memory. So when a core begins to work on the data, it ratchets up a counter stored at a central location, and when it finishes its task, it ratchets the counter down. The counter thus keeps a running tally of the total number of cores using the data. When the tally gets to zero, the operating system knows that it can erase the data, freeing up memory for other procedures.

As the number of cores increases, however, tasks that depend on the same data get split up into smaller and smaller chunks. The MIT researchers found that the separate cores were spending so much time ratcheting the counter up and down that they weren’t getting nearly enough work done. Slightly rewriting the Linux code so that each core kept a local count, which was only occasionally synchronized with those of the other cores, greatly improved the system’s overall performance.

On the job

“That basically tells you how scalable things already are,” says Frans Kaashoek, one of three MIT computer-science professors who, along with four students, conducted the research. “The fact that that is the major scalability problem suggests that a lot of things already have been fixed. You could imagine much more important things to be problems, and they’re not. You’re down to simple reference counts.” Nor, Kaashoek says, do Linux contributors need a trio of MIT professors looking over their shoulders. “Our claim is not that our fixes are the ones that are going to make Linux more scalable,” Kaashoek says. “The Linux community is completely capable of solving these problems, and they will solve them. That’s our hypothesis. In fact, we don’t have to do the work. They’ll do it.”

Kaashoek does say, however, that while the problem with the reference counter was easy to repair, it was not easy to identify. “There’s a bunch of interesting research to be done on building better tools to help programmers pinpoint where the problem is,” he says. “We have written a lot of little tools to help us figure out what’s going on, but we’d like to make that process much more automated.”

"The big question in the community is, as the number of cores on a processor goes up, will we have to completely rethink how we build operating systems," says Remzi Arpaci-Dusseau, a professor of computer science at the University of Wisconsin. "This paper is one of the first to systematically address that question."

Someday, Arpaci-Dusseau says, if the number of cores on a chip gets "significantly beyond 48," new architectures and operating systems may become necessary. But "for the next five, eight years," he says, "I think this paper answers pretty definitively that we probably don’t have to completely rethink things, which is great, because it really helps direct resources and research toward more relevant problems."

Arpaci-Dusseau points out, too, that the MIT researchers "showed that finding the problems is the hard part. What that hints at for the rest of the community is that building techniques — whether they’re software techniques or hardware techniques or both — that help to identify these problems is going to be a rich new area as we go off into this multicore world."


This story is republished courtesy of MIT News (http://web.mit.edu/newsoffice/), a popular site that covers news about MIT research, innovation and teaching.

Provided by Massachusetts Institute of Technology

————————————————————————————————————————

Tag cloud