STM32 F4 STM32 F2

 

STM32 F4   STM32 F2

Discovery kit for STM32 F4 series – with STM32F407 MCU

http://www.st.com/internet/evalboard/product/252419.jsp?WT.ac=fp_sep11_stm32f4discovery

The STM32F4DISCOVERY helps you to discover the STM32F4 high-performance features and to develop your applications easily. It includes everything required for beginners and experienced users to get started quickly.
Based on the STM32F407VGT6, it includes an ST-LINK/V2 embedded debug tool, two ST MEMS, digital accelerometer and digital microphone, one audio DAC with integrated class D speaker driver, LEDs and push buttons and an USB OTG micro-AB connector.
A large number of free ready-to-run application firmware examples are available on www.st.com/stm32f4-discovery to support quick evaluation and development.

 

———————————————————————————-

STM32 F2 series of high-performance MCUs

http://www.st.com/internet/mcu/subclass/1520.jsp

The ARM® Cortex™-M3-based STM32 F2 series is built on ST’s advanced 90 nm NVM process technology with the innovative adaptive real-time memory accelerator (ART Accelerator™) and the multi-layer bus matrix offering an unprecedented price/performance trade-off.
This series is characterized by a high degree of integration combining up to 1 Mbyte of Flash memory and up to 128 Kbytes of SRAM with Ethernet MAC, USB 2.0 HS OTG, camera interface, and hardware encryption support and external memory interface.
ST‘s acceleration technology enables these MCUs to achieve up to 150 DMIPS at 120 MHz FCPU which is equivalent to zero wait state execution, while keeping the dynamic current consumption with
188 µA/MHz at an outstandingly low level.
The devices are available in LQFP64, LQFP100, LQFP144, WLCSP64 (< 4 x 4 mm), UFBGA176 and LQFP176 packages.

Documents

Datasheets (2)  Databriefs (0)  Errata Sheets (1)   Option Lists (0)

Application notes (22)  Technical notes (1)   Programming manuals (2)

Reference Manuals (1)  User manuals (3)

Software Resources

Emulators (0)  Debuggers (0)  Device Programmers (1)  Operating Systems (0)

Codecs (0)  Drivers (1)  Firmware (12)  See all

Hardware Resources

Product Evaluation Tools   Debugging Tools   Programming Tools   Tool Accessories

HW models   Tools Home

e-Learning

Product presentations (1)  Training presentations (0)  Demo Videos (0)

e-Learning Home

—————————————–

STM3220G-EVAL    Evaluation board for STM32 F-2 series

http://www.st.com/internet/evalboard/product/250374.jsp

The STM3220G-EVAL evaluation board is a complete demonstration and development platform for the STM32 F-2 series and includes an embedded STM32F207IGH6 high-performance ARM®Cortex™-M3 32-bit microcontroller.
The full range of hardware features on the board is provided to help you evaluate all peripherals (USB OTG HS, USB OTG FS, ethernet, motor control, CAN, MicroSD card, smartcard, USART, Audio DAC, RS-232, IrDA, SRAM, MEMS, EEPROM… etc.) and develop your own applications.
The in-circuit ST-LINK/V2 tool can be easily used for JTAG and SWD interface debugging and programming.

—————————————————————————-

http://www.st.com/internet/com/support/tools_and_resources.jsp

Everything you need to develop your product

Inside this section you will find everything you need to evaluate ST’s semiconductor devices and design your product around them.

Evaluation Tools are organised by Product Evaluation Boards that allow a quick and easy evaluation of a device in a standalone environnment and System Evaluation Boards that allow evaluation of our devices in full system solutions like a power meter, motor drive or solar panel inverter or as a subsystem of an application. In each case a Circuit Schematic, Bill of Materials and PCB layout are available to facilitate their inclusion in your final product.

The Development Tools section includes all the hardware tools available to develop Microcontroller and Embedded Microprocessor solutions: Debugging tools, Programming Tools, Starter Kits and Accessories used to interconnect the tools and the target board.

The Software section is divided into 3 areas: Simulation and CAE Resources contains all the Simulators, CAE models and symbols as well as some calculators that help in assessing battery life, clock accuracy etc. Software Tools contains all the software that is installed and runs on your PC or workstation to configure your target system, develop target software (compile, build and debug tools) and program the target system. Runtime Software contains ready built software that helps accelerate your time to market with code libraries, examples and peripheral drivers, demonstration software, codecs, protocol stacks, operating systems and various pre-built firmware modules for specific functions.

The  Third-Party Tool suppliers section complements the above with a directory of 3rd party partners that provide complementary products and tools and the Design Consultants section contains a directory of known experts in the application of certain ST products and/or with particular application expertise.

—————————————————————————————–

3 comments for “STM32 F4 STM32 F2

  1. 27 2 月, 2013 at 12:22 下午

    Your report has confirmed helpful to us. It’s
    quite helpful and you are certainly very well-informed
    in this area. You get opened up my own face in order to
    different views on this particular topic along with intriguing, notable
    and reliable written content.

  2. 12 3 月, 2013 at 1:41 下午

    Your current article provides established helpful to us.

    It’s really useful and you’re clearly very experienced in this field. You have got exposed my own face to be able to varying views on this specific matter using interesting and strong articles.

  3. 22 4 月, 2013 at 2:00 上午

    The write-up features proven helpful to me personally.
    It’s really educational and you are clearly quite
    well-informed in this area. You have popped our eye to varying thoughts about this kind of topic using intriguing, notable
    and solid written content.

發佈留言

發佈留言必須填寫的電子郵件地址不會公開。 必填欄位標示為 *