Lattice Website NEWS Subscription (Week of Oct 17, 2010)

 

Your

Lattice Website NEWS Subscription

(Week of Oct 17, 2010)

Your subscription frequency: Weekly

Products > FPGA

IPUG84 RapidIO 2.x LP-Serial Physical Layer Endpoint IP Core (version 01.1)

Updated: 10/18/10 – Added support for Diamond software. Added integrated support for x4 @ 2.5G. Added more flexible clocking scheme for x1, x2 modes supporting link rates up to 3.125G.

TN1214 Low-Cost Serial RapidIO to TI 6482 Digital Signal Processor Interoperability with LatticeECP3 (version 01.1)

Updated: 10/18/10 – Updated AMC eval board information.

EB56 LatticeECP3 AMC Evaluation Board User’s Guide (version 01.0)

Updated: 10/19/10 – The LatticeECP3 AMC Evaluation Board allows designers to investigate and experiment with the features of the LatticeECP3 high-speed SERDES transceivers in an AMC system environment. The features of the LatticeECP3 AMC Evaluation Board assist engineers with rapid prototyping and testing of their designs. The board follows portions of the PICMG AMC R2.0 AMC form-factor specification that allows users the capability to use the board in live system evaluations. This user’s guide is intended to be referenced in conjunction with evaluation design tutorials to demonstrate the LatticeECP3 FPGA.

UG39 LatticeECP3 AMC SRIO2.1 Demonstration User Guide (version 0.1)

Updated: 10/19/10 – The Lattice Serial RapidIO (SRIO) demo provides a stand-alone platform to evaluate and test the Lattice SRIO v2.1 IP core in a true hardware environment. The demo runs on the ECP3 AMC evaluation board. The ECP3 AMC eval board is an industry standard AMC form-factor board. The ECP3 AMC card is installed into the loopback slot of the Lattice supplied AMC Interface card to provide stand-alone demonstration of sending and receiving RIO packets, along with inspecting RIO link configuration registers and displaying link statistics.

Products > FPGA, CPLD and Mixed Signal Design Software

PAC-Designer 6.0 Design Software Executable (version 6.0)

New: 10/22/10 – Update of PAC-Designer design software from version 5.3 to version 6.0. Includes support for new Platform Manager Product family.

Products > Intellectual Property – Lattice IP Cores and Reference Designs

IPUG84 RapidIO 2.x LP-Serial Physical Layer Endpoint IP Core (version 01.1)

Updated: 10/18/10 – Added support for Diamond software. Added integrated support for x4 @ 2.5G. Added more flexible clocking scheme for x1, x2 modes supporting link rates up to 3.125G.

EB56 LatticeECP3 AMC Evaluation Board User’s Guide (version 01.0)

Updated: 10/19/10 – The LatticeECP3 AMC Evaluation Board allows designers to investigate and experiment with the features of the LatticeECP3 high-speed SERDES transceivers in an AMC system environment. The features of the LatticeECP3 AMC Evaluation Board assist engineers with rapid prototyping and testing of their designs. The board follows portions of the PICMG AMC R2.0 AMC form-factor specification that allows users the capability to use the board in live system evaluations. This user’s guide is intended to be referenced in conjunction with evaluation design tutorials to demonstrate the LatticeECP3 FPGA.

UG39 LatticeECP3 AMC SRIO2.1 Demonstration User Guide (version 0.1)

Updated: 10/19/10 – The Lattice Serial RapidIO (SRIO) demo provides a stand-alone platform to evaluate and test the Lattice SRIO v2.1 IP core in a true hardware environment. The demo runs on the ECP3 AMC evaluation board. The ECP3 AMC eval board is an industry standard AMC form-factor board. The ECP3 AMC card is installed into the loopback slot of the Lattice supplied AMC Interface card to provide stand-alone demonstration of sending and receiving RIO packets, along with inspecting RIO link configuration registers and displaying link statistics.

Products > Development Kits and Hardware

QS008 Power Manager II Hercules Development Kit Quick Start Guide (version 1)

New: 10/20/10 – Initial verison of Power Manager II Hercules Dev Kit Quick Start guide.

Solutions

UG39 LatticeECP3 AMC SRIO2.1 Demonstration User Guide (version 0.1)

Updated: 10/19/10 – The Lattice Serial RapidIO (SRIO) demo provides a stand-alone platform to evaluate and test the Lattice SRIO v2.1 IP core in a true hardware environment. The demo runs on the ECP3 AMC evaluation board. The ECP3 AMC eval board is an industry standard AMC form-factor board.

The ECP3 AMC card is installed into the loopback slot of the Lattice supplied AMC Interface card to provide stand-alone demonstration of sending and receiving RIO packets, along with inspecting RIO link configuration registers and displaying link statistics.

—————————————————————————————————————–

發佈留言

發佈留言必須填寫的電子郵件地址不會公開。 必填欄位標示為 *