LPCXpresso for Linux is here


LPCXpresso for Linux is here


LPCXpresso™ is a new, low-cost development platform available from NXP. It supports NXP’s ARM-based LPC microcontrollers. The platform is comprised of a simplified Eclipse-based IDE and low-cost target boards which include an attached JTAG debugger.

Designed for simplicity and ease of use, the LPCXpresso IDE (powered by Code Red) will provide software engineers a quick and easy way to develop their applications.

The LPCXpresso target boards are jointly developed by Embedded Artists, Code Red, and NXP.

Two LPCXpresso boards have been released. The first features the LPC1343 with integrated USB 2.0 Full Speed Device, while the second features the LPC1114, which is the first Cortex M0 controller released to market. Future LPCXpresso boards with other LPC microcontrollers are planned.

LPCXpresso is an end-to-end solution enabling embedded engineers to develop their applications from initial evaluation to final production.

All LPC11xx Series MCUs
All LPC13xx Series MCUs
All LPC17xx Series MCUs

ARMマイコン パーフェクト学習基板
LPC1343搭載! USBに挿すだけ! OPアンプ/センサ/カレンダIC搭載!
© August 2010; Japanese; Ordering Code: See Publisher

LPCXpresso Introduction training video
Training Module: LPCXpresso Introduction
© December 2009; English; Ordering Code: Not Orderable

Low-cost development platform for 32-bit LPC microcontroller family
NXP LPCXpresso
© November 2009; English; Ordering Code: 9397 750 16842

Introduction to LPCXpresso
NXP Semiconductors and Code Red Technologies
© October 2009; English; Ordering Code: Not Orderable



發佈留言必須填寫的電子郵件地址不會公開。 必填欄位標示為 *