Symmetricom’s new mobile network clocks take it to the edge!


Symmetricom’s new mobile network clocks take it to the edge!

Mobile networks are adding small cells, and base station technologies are evolving.

Many backhaul networks cannot support the timing requirements of these deployments.

The TimeProvider 2700 and TimeProvider 2300 Edge Master Clocks expand the portfolio of synchronization solutions.

One will be right for your network.

TimeProvider® 2700 Edge Grandmaster Clock
TimeProvider® 2300 Edge Boundary Clock

Edge Master Clocks are IEEE 1588 Precision Time Protocol (PTP) products designed for deployment in current networks by locating a grandmaster at the edge or by overlaying the network with advanced boundary clocks at selected locations.

Edge Master Clocks can be deployed to eliminate backhaul network timing issues caused by third-party networks, noisy transport technologies, and high packet delay variation or asymmetry.

They enable 3G and 4G/LTE networks to increase capacity and coverage with small cells, and they support the stringent phase and time requirements of LTE-TDD and LTE-A deployments without changing the current backhaul network.

Join this webinar to learn about the new Edge Master Clocks and their applications.

  • You will gain knowledge of the timing requirements and challenges of small cells and evolving mobile technologies
  • You will see different network scenarios and learn when Edge Master Clocks are the best solutions

And of course, you will learn about Symmetricom’s new Edge Grandmaster and Edge Boundary Clocks



發佈留言必須填寫的電子郵件地址不會公開。 必填欄位標示為 *