Maxim Integrated Products provides the strongest levels of security when authentication of peripherals is necessary

New Products

December 8, 2012

Press Release: DeepCover Chipset from Maxim Integrated Advances Secure Authentication Between

Systems and Peripherals

Maxim Integrated Products, Inc. (NASDAQ: MXIM) announced it is now sampling a new chipset that provides the strongest levels of security when authentication of peripherals is necessary.

As part of Maxim’s DeepCover™ security products, the chipset comprises the DS2465 secure coprocessor with integrated 1-Wire® master and the DS28E15/DS28E22/DS28E25 1-Wire secure authenticators. This secure chipset protects a revenue stream by ensuring that only licensed peripherals are used with OEM equipment. Many applications in consumer, medical, industrial, and communications markets will immediately benefit from this security.
More Info >

Feature Rich, 1-Channel DAC Family with I²C-Compatible, 2-Wire Interface

MAX5803, MAX5804, MAX5805
Ultra-Small, Single-Channel, 8-/10-/12-Bit Buffered Output Voltage DACs with Internal Reference and I²C Interface

  • Three selectable internal voltage references add flexibility to choose different output voltages and reduce external part count and board cost
  • Independent 1.8V to 5.5V digital I/O power-supply input provides a dedicated supply that allows user interface operation independent of device supply
  • Rail-to-rail output buffer, with 0.1Ω output impedance
  • Pin-selectable active-low LDAC or active-low CLR
  • Small, 10-pin, 2mm x 3mm TDFN and 3mm x 5mm µMAX® Packages

More Info >

Feature Rich, 1-Channel DAC Family with 3-Wire SPI/QSPI™/MICROWIRE®/DSP-Compatible Interface
MAX5703, MAX5704, MAX5705
Ultra-Small, Single-Channel, 8-/10-/12-Bit Buffered Output Voltage DACs with Internal Reference and SPI Interface

  • Three delectable internal voltage references add flexibility to choose different output voltages and reduce external part count and board cost
  • Independent 1.8V to 5.5V digital I/O power-supply input provides a dedicated supply that allows user interface operation independent of device supply
  • Rail-to-rail output buffer, with 0.1Ω output impedance
  • Pin-selectable active-low LDAC or active-low CLR
  • Small, 10-pin, 2mm x 3mm TDFN and 3mm x 5mm µMAX® packages

More Info >

————————————————————————————————————–

發佈留言

發佈留言必須填寫的電子郵件地址不會公開。 必填欄位標示為 *