MAX14778

 

MAX14778

Dual ±25V Above- and Below-the-Rails 4:1 Analog Multiplexer

Simplify Designs with the Industry’s First ±25V Above- and Below-the-Rails Multiplexer

Description

The MAX14778 dual 4:1 analog multiplexer supports analog signals up to ±25V with a single 3.0 to 5.5V supply. Each multiplexer has separate control inputs to allow independent switching, making the device ideal for multiplexing different communications signals with the same connector pins. Extended ESD protection of ±6kV (Human Body Model) enable direct interfacing to cables and connectors.
The MAX14778 features a low 1.5Ω (max) on-resistance and 3mΩ (typ) flatness to maximize signal integrity over the entire common-mode voltage range. Each multiplexer can carry up to 300mA of continuous current through the multiplexer in either direction.
The MAX14778 supports switching of full-speed USB 1.1 signals (12Mbps) and RS-485 data rates of up to

MAX14778

Dual ±25V Above- and Below-the-Rails 4:1 Analog Multiplexer

Simplify Designs with the Industry’s First ±25V Above- and Below-the-Rails Multiplexer

—————————————————————————————————-

發佈留言

發佈留言必須填寫的電子郵件地址不會公開。 必填欄位標示為 *